3m (10ft) NVIDIA/Mellanox MCA7J60-N003 Compatible 800G OSFP 8 x 100G PAM4 Finned Top to 2 x 400G OSFP 4 x 100G PAM4 Flat Top InfiniBand NDR Active Direct Attach Copper Breakout Cable for Quantum-2 Switches and ConnectX-7 HCA
3m (10ft) / NVIDIA (IB)
Dhs. 3,703.03
Sale price
Dhs. 3,703.03
Regular price
Dhs. 5,184.24
Skip to product information
Description
The NVIDIA/Mellanox MCP7Y00-N003 Cable is an 800Gb/s twin-port OSFP to two 400Gb/s twin-port OSFP InfiniBand NDR Active Direct Attached Copper dual breakout cable. The 8-channel twin-port OSFP end uses a finned top form-factor for use in Quantum-2 and Spectrum-4 switch cages. The two 400G ends support 4-channels of 100G-PAM4 (400G) and use a flat top OSFP for use in ConnectX-7 adapters using riding heat sinks on the connector cage. This cable is compliant with OSFP MSA (Multi-Source Agreement) and IEEE 802.3ck standards. ACCs offer the lowest latency, so are widely used in data centers to connect servers and GPU compute systems to the top-of-rack (TOR) switches and link spine-to-super-spine switches inside racks over short cable lengths. ACCs are also used to create InfiniBand storage fabrics with hard-disk-drive (HDD) and flash memory subsystems. ACC cables are the second lowest-cost, low-latency, low-power consuming, high-speed links next to passive DACs due to their simplicity of design and minimal components. They enhance port bandwidth, density, configurability, and reduce power requirements in supercomputers and hyperscale systems.
3m (10ft) NVIDIA/Mellanox MCA7J60-N003 Compatible 800G OSFP 8 x 100G PAM4 Finned Top to 2 x 400G OSFP 4 x 100G PAM4 Flat Top InfiniBand NDR Active Direct Attach Copper Breakout Cable for Quantum-2 Switches and ConnectX-7 HCA
Dhs. 3,703.03
Sale price
Dhs. 3,703.03
Regular price
Dhs. 5,184.24
The NVIDIA/Mellanox MCP7Y00-N003 Cable is an 800Gb/s twin-port OSFP to two 400Gb/s twin-port OSFP InfiniBand NDR Active Direct Attached Copper dual breakout cable. The 8-channel twin-port OSFP end uses a finned top form-factor for use in Quantum-2 and Spectrum-4 switch cages. The two 400G ends support 4-channels of 100G-PAM4 (400G) and use a flat top OSFP for use in ConnectX-7 adapters using riding heat sinks on the connector cage. This cable is compliant with OSFP MSA (Multi-Source Agreement) and IEEE 802.3ck standards. ACCs offer the lowest latency, so are widely used in data centers to connect servers and GPU compute systems to the top-of-rack (TOR) switches and link spine-to-super-spine switches inside racks over short cable lengths. ACCs are also used to create InfiniBand storage fabrics with hard-disk-drive (HDD) and flash memory subsystems. ACC cables are the second lowest-cost, low-latency, low-power consuming, high-speed links next to passive DACs due to their simplicity of design and minimal components. They enhance port bandwidth, density, configurability, and reduce power requirements in supercomputers and hyperscale systems.